how to mount ring light on wall

While tabletop ring lights are convenient, a Wall Mounted Ring Light saves valuable desk space, offers more stable positioning, and lets you customize the lighting angle for optimal results—whether you’re filming videos, taking photos, or just brightening up your workspace. If you’re wondering how to mount ring light on wall safely and effectively, this step-by-step guide has you covered.
What You’ll Need Before Mounting
Before you start drilling, gather all the necessary tools and materials to ensure a smooth installation. Here’s your checklist:
· Ring light (ensure it’s compatible with wall mounting—most models come with a mounting bracket or offer a separate wall mount accessory)
· Wall mount bracket (included with the ring light or purchased separately; choose one that supports the weight of your ring light)
· Drill and drill bits (match the bit size to the screws provided with the mount)
· Screws and wall anchors (included with the mount; use anchors if mounting on drywall, plaster, or brick—skip anchors for wood studs)
· Level (to ensure your ring light is straight, not lopsided)
· Pencil (for marking drill points on the wall)
· Stud finder (optional but recommended for mounting on drywall—attaching to a stud adds extra stability)
· Screwdriver (manual or electric, for securing screws into the mount)

Step 1: Choose the Perfect Location for Your Wall Mounted Ring Light
The first step in learning how to mount ring light on wall is selecting the right spot. Consider your use case: if you’re using the ring light for makeup or skincare, mount it at eye level near your vanity. For content creation (YouTube, TikTok, or live streams), position it above or beside your camera to avoid harsh shadows on your face. For a workspace, mount it to the side of your monitor to reduce eye strain.
Also, check for nearby power outlets—you don’t want to stretch the ring light’s cord too far (use a cord cover later for a clean look). Avoid mounting near water sources (like bathrooms) unless your ring light is waterproof. Finally, ensure the wall surface is sturdy enough to support the ring light’s weight—avoid weak spots like hollow drywall without anchors.
Step 2: Mark and Prep the Mounting Area
Once you’ve chosen the location, grab your wall mount bracket and level. Hold the bracket against the wall in your desired position, making sure it’s aligned correctly (use the level to check for straightness). With a pencil, mark the drill holes through the bracket’s screw holes—this will guide where you drill.
If you’re mounting on drywall, use a stud finder to locate a wood stud. Mounting directly into a stud is the most secure option. If a stud isn’t available, mark the spots for wall anchors—they’ll distribute the weight and prevent the mount from pulling out of the wall.
Step 3: Drill Holes and Install Anchors (If Needed)
Put on safety goggles (to protect your eyes from dust) and drill into the marked spots. If you’re using wall anchors, drill a hole slightly smaller than the anchor—this ensures a tight fit. Gently tap the anchors into the holes with a hammer until they’re flush with the wall.
For wood studs, skip the anchors and drill directly into the stud. Use a drill bit slightly smaller than the screws to create a pilot hole—this makes it easier to drive the screws in without splitting the wood.
Step 4: Secure the Mount Bracket to the Wall
Place the mount bracket back over the holes (or anchors) and align it with your pencil marks. Insert the screws through the bracket’s holes and into the anchors or stud. Use a screwdriver or drill to tighten the screws—ensure the bracket is firm and doesn’t wiggle. Give it a gentle tug to test stability; if it moves, tighten the screws further or adjust the anchors.
Step 5: Attach the Ring Light to the Mount
Most ring lights have a detachable base or a 1/4-inch screw port that fits standard wall mounts. Align the ring light’s mounting port with the screw on the wall bracket. Twist the ring light clockwise to secure it, or use the included bolt (if provided) to fasten it tightly. Double-check that the ring light is securely attached—you don’t want it to fall mid-use.
Step 6: Adjust the Angle and Test the Light
Now that your Wall Mounted Ring Light is installed, adjust the angle to suit your needs. Many mounts offer 360-degree rotation or tilting capabilities, so you can direct the light exactly where you need it. Plug in the ring light and test the brightness and color temperature settings to ensure everything works properly.
For a polished look, use cord covers to hide the power cord along the wall. This keeps your setup neat and prevents tripping hazards.
Pro Tips for a Successful Wall Mounted Ring Light Installation
· Weight matters: Always check the ring light’s weight and ensure the mount and wall can support it. Heavy ring lights (10+ pounds) may require heavy-duty anchors or stud mounting.

· Avoid damage: If you’re renting, use adhesive wall mounts (no drilling) for lightweight ring lights. Just ensure the adhesive is strong enough and won’t damage the wall paint.

· Weatherproofing: For outdoor use (e.g., patio content creation), choose a weatherproof ring light and mount to protect against rain and humidity.

· Regular checks: Every few months, tighten the screws and inspect the mount for wear—this keeps your ring light secure long-term.

Learning how to mount ring light on wall is a simple DIY project that transforms your space and lighting quality. A Wall Mounted Ring Light is a game-changer for anyone who values space-saving solutions and consistent lighting. By following these steps, you’ll have a secure, professional setup in no time—perfect for creating content, working, or enhancing your daily routine.

Have you installed a wall mounted ring light before? Share your tips in the comments below!